Installation-friendly hammerset anchor for multiple fixings
The Fischer nail anchor FNA II 6 with hook is made of zinc-plated steel. The FNA II is set in a time-saving manner in the pre-positioned installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II 6 with hook is suitable for fixing air lines and hangers in internal areas.
Technical Parameters:
ETA Approval | No | Hook eye inner diameter | 10 mm | |
Drill hole diameter | 6 mm | Material | Steel | |
Min. drill hole depth | 35 mm | Zink plated | Yes | |
Size | 54 x 6 mm | Items per box | 50 |
Applications
- Fire protection plates
- Fire protection boards
- Ventilation systems
- Wire and Nonius hangers
- Mounting rails
- Metal clamps
- Substructures made of wood and metal
Building Materials
Approved for:
- Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications
Also suitable for:
- Solid sand-lime brick
- Natural stone with dense structure
- Prestressed hollow-core concrete slabs
Manufacturer Code:
44126
Standard 2:
EN 10088-1:2015 Stainless steels - Part 1: List of stainless steels
Standard 3:
EN 10139:2016 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions