Installation-friendly hammerset anchor for multiple fixings
The Fischer nail anchor FNA II-OE with eye is made from zinc-plated steel. It is primarily suitable for the anchoring of wire and nonious hangers indoors. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA is set with a few hammer blows in a time-saving push-through installation. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole. Due to the low anchorage depth, no reinforcement hits are required. This saves time and costs during series installation.
Technical Parameters:
ETA Approval | Yes | Hook eye inner diameter | 10 mm | |
Drill hole diameter | 6 mm | Material | Steel | |
Min. drill hole depth | 35 mm | Zink plated | Yes | |
Size | 54 x 6 mm | Items per box | 50 |
Applications
- Fire protection plates
- Fire protection boards
- Ventilation systems
- Wire and Nonius hangers
- Mounting rails
- Metal clamps
- Substructures made of wood and metal
Building Materials
Approved for:
- Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications
Also suitable for:
- Solid sand-lime brick
- Natural stone with dense structure
- Prestressed hollow-core concrete slabs
Permission
- ETA-06/0175
- DoP No. 0756-CPD-0331
Manufacturer Code:
44127
Standard 2:
EN 10088-1:2015 Stainless steels - Part 1: List of stainless steels
Standard 3:
EN 10139:2016 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions