Outdoor wall lights cast a warm, welcoming glow and illuminate areas that would otherwise be in shadow, which helps guests safely move about. Outdoor wall lights are a type of accent lighting and require low-wattage bulbs. Outdoor lanterns look great at night adding a touch of mystery to your porch, patio or in the park.
Passive InfraRed (PIR) sensors detect heat. They do this by measuring the ambient temperature of the room using several detection beams. When a difference in temperature is detected by one of the beams, the sensor is activated, switching on the lights. When all the beams sense the same temperature again, the lights will switch off.
Technical parameters:
| Power | 6.8 W | Light color | Warm and natural white | |
| Size | 270 x 221 x 109.2 mm | Color Temperature | 3 000K, 4 000 К | |
| Weight | 1.05 kg | Luminous flux | 800 lm | |
| Charging time | 6-7 hrs Sunlight Charge | Additional features | PIR sensor, UV protection | |
| Litium Battery | 3.7V/1 200 mAh | Material | ABS, PC | |
| Starting Time | 0.001 sec (instantly) | Color stability | 14 pcs (Front 12, Back 2) | |
| IP Rating | IP65 | Items per pack | 1 | |
| Environment | -20°C up to + 45°C | Items per box | 8 | |
| PIR sensor range | 2-6 m, 120° | Certification | CE, EMC, ROHS | |
| Working time | Mode A 5 hrs | Warranty | 2 years | |
| Mode B 2-3 nights | ||||
| Mode C 3-4 nights |
Product benefits
- An innovative and sustainable way of lighting up your outdoors
- Function up to 4 nights, with just 6-7 hours charging during the day
- Inbuilt sensors allow these outdoor lamps to light up upon detection of movement
- ZERO Electricity Cost
- Light on/off automatically
- Solar Powered
- PIR Detective
- Cordless
Applications
- Gardens, Pools
- Outdoor Residential Areas
- Walkways & Passages
- Driveways
- Fountains, Lawns, Entrance, Patio or Terrace and similar environments.
IP rating is also known as Ingress Protection or International Protection ratings which are defined to the international standard of EN 60529 (British BS EN 60529:1992). This standard is used to define the levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies such as tools, dirt and moisture.
What do the two digits in an IP Rating mean?
The rating consists of the letters IP followed by two digits, if a number is replaced by X this indicates that the enclosure is not rated for that specification.
IP65 = First Digit - Solids
The first digit indicates the level of protection that the enclosure provides against access to hazardous parts (electrical conductors, moving parts etc) and the ingress of solid foreign objects.
IP65 = Second Digit - Liquids
The second digit defines the protection of the equipment inside the enclosure against various forms of moisture (drips, sprays, submersion etc).
| Digit | Intrusion Protection | Second Digit | Moisture Protection |
| 0 | No protection. | 0 | No protection. |
| 1 | Protected against solid objects over 50mm, e.g. accidental touch by hands. | 1 | Protected against vertically falling drops of water, e.g. condensation. |
| 2 | Protected against solid objects over 12mm, e.g. fingers. | 2 | Protected against direct sprays of water up to 150 from the vertical. |
| 3 | Protected against solid objects over 2.5mm, e.g. tools & wires. | 3 | Protected against direct sprays of water up to 600 from the vertical. |
| 4 | Protected against solid objects over 1mm, e.g. wires & nails. | 4 | Protected against water splashed from all directions, limited ingress permitted. |
| 5 | Protected against dust limited ingress, no harmful deposits. | 5 | Protected against low pressure jets of water from all directions, limited ingress permitted. |
| 6 | Totally protected against dust. | 6 | Protected against strong jets of water, e.g. on ships deck, limited ingress permitted. |
| 7 | Protected against immersion, up to 1 meter in depth. | ||
| 8 | Protected against immersion, up to 3 meter in depth. | ||
| 9 | Protected against powerful high-temperature water jets |
Manufacturer Code:
8279
Standard 2:
EN 62471 Photobiological safety of lamps and lamp systems.
Standard 3:
EN 62493 Assessment of lighting equipment related to human exposure to electromagnetic fields.
