Photoelectric switches control the power to a connected appliance or fixture by measuring the light falling on the lens (also called the "eye"). These switches are mostly employed in outdoor locations to allow lights to turn on automatically after the sun has gone down.
Operating voltage: 110÷230 V AC, +10 % / –15 %
Frequency: 50÷60 Hz
Brightness range: 1÷99 000 lx
On/off switch delay: 0÷59 min
Standby: 0.8 W
Switch output: Switching of any external conductor is permitted
Contact: µ-contact, two way switch
Max. switching capacity: 16 A (at 250 V, cos ϕ = 1)
Switching capacity: 10 A (at 250 V, cos ϕ = 0.6)
Min. switching capacity: 10 mA/230 V AC 100 mA/24 V AC/DC
Power reserve: 10 years
Shortest delay time: 1 s
Switching accuracy: To the second
Software: Class A
Rated impulse voltage: 4 kV
Pollution degree: 2
Glow lamp load: 2600 W
Halogen lamp load: 2600 W
Fluorescent lamps KVG:
- uncorrected: 2600 VA
- series-corrected: 2600 VA
- parallel-corrected: 1300 VA (130µF)
Fluorescent lamps (EVB): 1100 W
LED lamps (< 2 W): 50 W
LED-lamps (> 2 W): 600 W
Permissible ambient temperature: –25 °C÷+55 °C, –40 °C ÷ +70 °C (sensor)
Protection class: II (light sensors III) if correctly mounted
Bluetooth OBELISK top3:
- Protection rating: IP 40
- Temperature: –30 °C ÷ +55 °C
- Range: 15 m on open air test site
Protection rating:
- Device: IP 20
- Mounted light sensor: IP 55
- Installation light sensor: IP 66 (front side, when installed); IP 40 (backside)
Technical Parameters:
| Net width | 36 mm |
|---|---|
| Net height | 86 mm |
| Netto depth | 90 mm |
| Net weight | 2.54kg |
| Model | Photoelectric switches |
| Time range | Weekly program |
| Packaging units | 1 pc |
Manufacturer Code:
BZT17D011-
