A keystone jack is a female connector used in data communications, particularly local area networks (LANs). The jack is usually mounted in a wall plate or patch panel. A keystone plug is the matching male connector, usually attached to the end of a cable or cord.
A registered jack (RJ) is a standardized telecommunication network interface for connecting voice and data equipment to a service provided by a local exchange carrier or long distance carrier.
Technical Parameters:
Net length | 36.5 mm |
---|---|
Net width | 14.5 mm |
Net height | 20.8 mm |
Net weight | 0.03 kg |
Min. ambient temperature | -40°C |
Max. ambient temperature | 70°C |
Product | Modul - Buchse |
Shielding | shielded |
SCHRACK Format | SFB |
Connector standard | IEC 60603-7-51 |
Category | Cat.6A/10GB |
Class E<sub>A</sub> | acc. to ISO/IEC 11801 Amendment 1/2 typical link length > 2m, in combination with a CP-cable: CP-Link typ. > 10m 10GbE is supported |
PoE+ | Yes |
Plugging cycles | ≥ 750 |
Insertion force | ≤ 30N |
Conductor diameter | solid 0.51 - 0.65 mm AWG24/1 - AWG 22/1 |
Insulation diameter | 5 - 9 mm |
Reusable (Module) | ≤ 5 cycles with the same diameter |
RoHS | Compliant with EU directive 2002/95/EC |
Housing | Zinc diecast |
Strain-relief sliver | Zinc diecast |
Surface | nickel plated |
Shield spring | Stainless steel |
PCB | FR4 |
PCB finish | HAL lead-free |
Contact material | Spring steel |
Contact finish | 0.762 µm / 30 µin Au |
Insulation housing | PA black (RAL9005) |
Contact support plate | PC yellow (RAL1021) |
Dust protection cover | PC clear |
IDC | CuNi2Si |
IDC finish | min. 3-6 µm (120-240µin) Sn |
Particularte ingress | IP2X |
Water ingress | IPX0 |
Put-ups | Bio-degradable |
Contact resistance | ≤ 20mΩ |
Insulation resistance | ≥ 500 MΩ |
Votage proof - contact-shield | ≥ 1500 (DC)V |
Current carring capacity at 50°C | 1.25A |
Transfer Impedance | @ 1 MHz = ≤ 100mΩ @ 10 MHz = ≤ 200mΩ @ 80 MHz = ≤ 1600mΩ |
Ports | 1 |
Packaging units | 1 pc, 12 pc, 240 pc |
Manufacturer Code:
HSPMRJ6G1T