Circlip pliers are sometimes referred to as retaining ring pliers, snap ring pliers or C-clip pliers. They're designed for installing or removing circlips, a type of fastener that works like a retaining ring.
Technical Parameters:
| Length | 130 mm | Coating | Grey atramentized | |
| Size of shaft capacity | Ø 10 ÷ 25 mm | Weight | 0.102 kg | |
| Tips (diameter) | Ø 1.3 mm | Head | Unpolished | |
| Style | Bent tips | Handles | Plastic coated non-slip | |
| Type | 2 | Product code | 49 21 A11 |
Advantages:
- With inserted tips for reliable work
- Heavy duty in continuous operation: up to 10 times longer service life compared to turned tips
- Large contact faces on the tips: no distortion of circlips, easy fitting
- Bolted joint: precise, zero backlash operation of pliers
- Internal opening spring, protected and captive
- Non-slip plastic coating on the handles
- Pliers body: chrome vanadium electric steel, forged, oil-hardened
- Inserted tips: spring steel wire, drawn
- Spring inside the joint: the spring is protected inside the precisely bolted joint. It does not hinder work and cannot get dirty or lost
- Tight fit through compression
High precision quality
Easy and reliable assembly: form-fitting inserted and pressed-in tips made of high-density spring steel offer a high level of protection against excessive stress and strain, e.g. when removing stuck rings. The large supporting surfaces and the position of the tips make it more difficult for the rings to bounce off.
Precision and durability
High-density spring steel with a score-free surface is used for the tips. This increases the tips' resistance to dynamic and static strain. The tips are 30 % more stable than conventional pliers when subjected to one-off overloading while still allowing good accessibility during assembly. Subjected to dynamic strain, the tips' resistance capacity is up to 10 times greater! The tips on the precision circlip pliers are non-detachable!
KNIPEX circlip pliers with overexpansion guard
For the standardized fitting of circlips in the industrial serial production. Particularly manufacturers of sensitive, safety-relevant components (e.g. brakes or gears) highly appreciate the compliance of DIN 471 and 472. The mounting of circlip rings in this case requires pliers with overexpansion guard or a cone. KNIPEX Circlip Pliers with overexpansion guard meet the requirements and furthermore offer a superior durability.
technical change and errors excepted
