A wall plug, also known as an anchor, expansion plug or "Rawlplug", is a fibre or plastic insert used to enable the attachment of a screw in material that is porous or brittle or that would otherwise not support the weight of the object attached with the screw.
The installation-friendly nylon plug Fischer S with 2-way expansion
The Fischer S expansion plug is the original and the proven classic millions of times for decades. The plastic fixing is made entirely from high-quality nylon. As a result, the plug is particularly robust during installation and guarantees permanent security. As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This prevents the building material from spalling due to fixings close to the edge. Wood or chipboard screws can be used to fix the object. The Fischer expansion plug S is ideal for fixing in concrete and solid masonry.
The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter.
The edge distance must be at least one plug length.
Advantages
- The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity.
- The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation.
- The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety.
Technical Parameters:
| Drill hole diameter | 6 mm | Screw diameter | 4 - 5 mm | |
| Min. drill hole depth | 40 mm | Material | Nylon | |
| Size | 30 x 6 mm | Items per box | 100 |
Applications
- Plumbing and heating fixings
Building Materials
- Concrete
- Solid sand-lime brick
- Natural stone with dense structure
- Solid brick made from lightweight concrete
- Solid brick
Manufacturer Code:
50106
