Cutting-off Wheels

Benefits:

High-grade raw materials

The bond is perfectly matched to the grit type used and guarantees a greater level of aggressiveness as well as a longer service life.

Bessere Performance

Enhanced performance

The synthetically produced grit ensures the consistently high performance of our Kronenflex® products. Available in three different quality classes, they are exceptionally well suited for all types of applications.

Bewährte Sicherheit

Proven safety

Our cutting-off wheels have been tested according to the guidelines of the oSa directives and are guaranteed to comply with European safety standard EN 12413.

Klingspor Kronenflex® cutting-off wheels with a disc thickness of 0.8 to 1 mm are very thin cutting-off wheels with very short cutting times and minimal burr formation.

These cutting-off wheels develop their full power when working on thin-walled materials and are known for their precise, accurate and fast cuts at lowest thermal loads. Due to the cutting-off wheels‘ excellent cutting properties the weight of the machine itself provides suitable grinding pressure.

Klingspor Kronenflex® cutting-off wheels of the 0.8 to 1 mm class are known for their high level of safety, efficiency and productivity.

Klingspor Kronenflex® cutting-off wheels with a disc thickness of 1.6 to 1.9 mm combine excellent cutting properties with a high degree of lateral stability.

These wheels provide convincing arguments especially in day-to-day applications when working on materials with medium-strength cross sections. They are known for their short cutting time, good stability and minimal burr formation. These advantages in connection with the wide range of applications make Klingspor Kronenflex® cutting wheels of the 1.6 to 1.9 mm class the highest performing universal wheel for daily use in metalworking.

Klingspor Kronenflex® cutting-off wheels with a disc thickness of 2 to 3.2 mm are known for their particularly high lateral stability. This is important for applications which require deep cuts into solid material – e.g. to cut risers/casts or large profiles. The enormous lateral forces that occur while working require high cutting-off wheel stability.

Despite their thickness, Klingspor Kronenflex® cutting-off wheels of the 2 to 3.2 mm class are known for their excellent cutting rate and long service life. These cutting-off wheels are ideal for applications that require a high degree of lateral stability.